The Type 8619 multiCELL controller from Burkert is a popular choice for delivering multi-channel measurement and control for a range of sensors. Now the benefits for process control systems have been extended with the addition of Ethernet connectivity, which will reduce installation time and greatly improve the connectivity of the control network.
With direct connection of a wide range of sensors to measure parameters such as flow rate, pH, ORP, temperature and conductivity, the multiCELL is ideally suited to the control and monitoring of water quality in industrial processes. Designed to provide flexibility and an easy-to-use interface, the multiCELL can be easily configured to suit a wide range of process control systems.
As more and more control systems start to integrate Ethernet communications, so Burkert is adding this important communication tool to many of its products. The continued implementation of this technology is making it considerably easier to install and operate process control infrastructure.
The initial product release by Burkert will enable communication using Modbus TCP and this will be shortly followed by the introduction of PROFINET and Ethernet/IP capability. This will greatly simplify the connection between the multiCELL and the PLC as well as removing the need for an additional I/O card in the PLC.
Each controller can be configured for a range of sensors as well as having up to six pre-configured I/O boards to accommodate any signal requirements. In addition, the multiCELL can be configured as a datalogger, using the built-in SD card slot for data storage.
This SD card slot can also be used to save sensor parameters and control application settings to allow the same settings to be replicated in another multiCELL controller; ensuring accurate transfer of control parameters between sites.
Geavanceerde elektronica en ultramoderne besturingsalgoritmen zorgen ervoor dat optimale procesbeheersing te allen tijde wordt behouden met minimale tussenkomst van de operator. Chemische doseerpompen of regelkleppen kunnen worden aangestuurd via puls, aan / uit of analoge signalen, afhankelijk van de toepassing in kwestie. De aanpasbaarheid en veelzijdigheid van de multiCELL maakt het mogelijk om te worden geïntegreerd in een verscheidenheid aan toepassingen, van de zeer simplistische tot de meer complexe ontwerpen.
Monitoring and maintaining water quality within an industrial process requires an array of sensors, flowmeters, pumps and control valves. By introducing the highly functional multiCELL, all of these components can be easily configured with parameters being set at the touch of a button.
In many cases, maintaining precise control over the quality of water within a process is a fundamental requirement. At the same time, improved communication and flexibility can go a long way to reducing down-time and maintenance costs.
Bürkert Fluid Control Systems
Fluid Control Centre, 1 Bridge End, Cirencester, Gloucestershire, GL7 1QY, Verenigd Koninkrijk
Tel: + 44 (0) 1285 648761 Fax: + 44 (0) 1285 648721
E-mail: [Email protected]
Bürkert Fluid Control Systems
Fabricage van procesapparatuur. Een van de weinige fabrikanten die oplossingen biedt voor de complete regellus.